Sliding system with lifting Schüco Corona CT 70 HS

Schüco Corona CT 70 HS

Sliding door with lift based on the Schüco CT 70 series of 70 mm profiles

Technical details

  • 5/6 Rooms
  • 2/3 Glass sheets
  • 38-45 dbSoundproofing
  • 167 mm Case depth
  • 0,6 -1,1 w/mpK
    Glass coefficient
  • 24 - 40 mm
    Glazing Thickness
  • Up to RC2 Protection
  • Invisible/Classic Welding
  • Rounded/Square Design
  • 1,5-2,5mm Reinforcement
  • 2 Seals
  • Aesthetic

Sistemul de profile din PVC Schüco CT 70 ușa culisantă cu ridicare care oferă confortul termic ideal!

usa culisanta cu ridicare Schuco Corona CT HS 70

Due to the threshold and perimeter profiles with thermal break, very good thermal insulation characteristics are obtained.

Sliding system with lifting Schüco Corona CT 70 HS

Thermal insulation

With multi-chamber PVC profiles with a frame depth of 70 mm and a high-performance insulating glass, the Schüco CT 70 HS system offers special thermal insulation characteristics specific to modern windows (Uw ≤ 1.4 W / (m²K)).

Insulation from the outside

The threshold of the lift-sliding door is designed so that there is no thermal bridge between the inside and the outside. This eliminates cold areas near the doors. The innovative gasket system guarantees maximum protection against wind and rain as well as optimal sound insulation. The locking system meets the highest anti-burglary safety requirements.

Variety of models

Great diversity of typologies: lift-sliding doors with two, three, or four fixed and movable frames. Due to the compatibility of the Schüco CT 70 HS lift-sliding door with the other system elements, the doors and windows of a façade can be made in a uniform way.

Color variety

With Schüco TopAlu aluminum covers and the Schüco foil range, the color options are virtually limitless.

TRP Geneo Rau Fipro

Increased performance
as standard

MULTITECH G Spacer

Termoplast - distantier multitech

The improvement of our product is a permanent concern for the teams of TERMOPLAST technicians. Made with innovative technologies, entirely from a polymer reinforced with a transparent barrier, MULTITECH G is the Warm Edge spacer with the best heat transfer coefficient on the market.

Therefore, the introduction of the new MULTITECH G spacer as standard equipment in every product made by our factory increases the technical performance of TERMOPLAST windows.

We raise the standard of our products through a:

  • Small-sized spacer with much more elegant appearance
  • Higher rigidity, better strength
  • Superior thermal insulation 22% more than the rest of the WE spacers and 140% more than the classic aluminium spacer
  • Considerable improvement in energy efficiency in more economical systems
  • Availability in various colours matched to the profile of the joinery, obvious aesthetic improvement
  • heat loss coefficient at the barrier between glass and Multitech G ledge is 0.027 W/mK

Energy Efficient Window Systems at an Irrefusable Price Contact a TERMOPLAST salesperson

We provide advice. Technologically superior materials. Wide range of types of glass. Showroom for testing and visualization.

messenger request quote
Termoplast - TRP Schüco 82

We sell throughout the whole Europe !

Built on the values of a family-run business, the mission of TERMOPLAST is to produce high-quality windows and doors at the highest technical and aesthetic level. We are proud that our products and services enjoy appreciation both in Romania and in the whole Europe!

TERMOPLAST Catalog

open

Social Media

Logo WhatsApp